Pro-Lift Lawn Mower Lift Jack – 350 Lbs Capacity for Tractors and Zero Turn Lawn Mowers – For Sale – Price

9 reviews for Pro-Lift Lawn Mower Lift Jack – 350 Lbs Capacity for Tractors and Zero Turn Lawn Mowers – For Sale – Price

1. 

   Chris Walker – 26 February 2025

   Simple, Stable – Just what I needed
   I have two mowers for a large hilly property and recently purchased our first ZERO turn Cub Cadet ZTS2 which is amazing on hills (for those wondering). I wanted to sharpen the blades but could not for all my efforts free up the nuts on the blades. I needed to get under this beast and use an impact wrench to do the job. This lift was just perfect. It gage me plenty of space to work under the deck and get the job done. Today I added new blades and a mulching kit. It was my second use of this lift and it is was a great experience. It is very simple to setup out of the box. I did not even need instructions. It is also easy to operate and is very stable on the maximum lift setting. I felt comfortable under the mowing deck. I kicked it and shook it a couple of times to test it. The lift also has wheels making it very easy to move about and it lays flat for storage either vertical or horizontal. I would recommend this lift. Good value for the money. Time will tell, of course, but so far so good!

2. 

   Richard – 26 February 2025

   Lift for lawnmower
   Very easy to put together. Very sturdy.

3. 

   Crazy Hick in NH – 26 February 2025

   It is perfect, with a few modifications
   PROS:
   Red (what can I say, I like the color)
   Easy to assemble
   Lays flatter than most of its competitors
   Lifts more than most of its competitors
   Brainless safety latch system (no more forgetting to set it)
   CONS:
   1) Must lay on a flat (not tilted) surface else you may roll downhill!
   2) Wheel baskets (my BIGGEST gripe)…
   2a) Tire (sizing) adjustment pins are unnecessary (in my application — Garden Tractor)
   2b) Angle of the baskets in the lowest position lean back much too far (I need to leave the brake on for a few pumps to avoid the GT from rolling off, yet it needs to be free-wheeling to avoid dragging the rear tires — too much switcherooning)
   2c) Slightly crooked when in the outermost position (and almost too wide for my GT)
   2d) Line up nicely in the innermost position (but it’s too narrow for my GT)
   2e) Why only 2 positions? Lots of real estate in that bracket, yet only two slots? Time to break out the drill! Problem solved.
   3) Safety/cotter pins throughout are ridiculously tiny (for my average size hands/fingers) – nothing worser than needing a tool to remove pins from tool-less components!
   4) The handle needs to be removed when jacking this thing up (it sorta gets “in the way”)
   While none of these CONS should stop one from purchasing this lift, there is room for improvement (given the cost when compared to the less expensive offerings out there).

4. 

   dlg – 26 February 2025

   Excellent product
   After years of struggling with cleaning my mower deck and removing the blades for sharpening, I finally purchased this lift……….SO GLAD I DID…….and at the same time mad at my self for tackling this job in an unsafe way. NEVER AGAIN.
   Product does state a weight limit, so I would observe that with caution. My mower is a Z-Turn 18hp Cub Cadet, and for that it works fine to life the front. But not the back where the engine is. It would probably life it but the mower’s rear might exceed that limit. BE SAFE.
   Material is heavy steel. The mechanics of it works as shown.
   very satisfied.
   I would like to get a larger cut mower and in such case I will have to buy a more sturdy lift. But till then, this is a great product to do what I need to be done.

5. 

   ENW SYSTEMS – 26 February 2025

   Works just as advertised
   This machine lifts my Club Cadet rider with no problems for belt replacement. Love it.
   Lord Dragoni The Ol wise one

6. 

   Linda Wallace – 26 February 2025

   Gets the job done safely, very pleased with it so far
   The Pro-Lift box came with everything inside, and I had no issues putting it together.
   Pros- no more back breaking, or crawling to change blades, or scrap clean the mowing deck.
   Light to move around, and the overall weld construction seems to be good.
   Cons – The carter pins are very small, you will need to make sure that you keep an eye on them.
   When disengaging the pump jack, make sure you do it very slowly, and only other issue is to make sure you have a flat surface to set the jack lift on.
   Because I have only my lawn to use, I had to use a sheet of plywood to make the lift stable, either then that, if you take care of how you use it, the product is excellent

7. 

   Amazon Customer – 26 February 2025

   Works just like it’s supposed to
   I tried several methods to jack my riding mower up for various maintenance tasks and always needed to add jack stands to feel safe under it. This not only lifts the mower higher than my other methods it also can be securely locked in place so you don’t have to worry about the hydraulics failing while your under the mower.

8. 

   Ron – 26 February 2025

   Arrived in good shape
   Easy assembly . Looks sturdy enough . Needed new bottle jack which company is shipping out.

9. 

   casper – 26 February 2025

   works great with safety lock