It is a test product. For informational purposes only.

BORLA 140039 Cat-Back Perf. Exhaust Sys. for ’97-’04 Chevrolet Corvette (C5) & Z06 (C5) V8 T-304 Stainless Steel S-Type Classic Dual Center Rear Exit Dual 4.25″x3.5″ Oval Polished T-304 Tips Each Side – For Sale – Price

Original price was: $1,316.99.Current price is: $1,192.15.



Description



😀Quel type de bouteille de réfrigérant devez-vous charger ?

Ce tuyau de charge de réfrigérant R134A convient aux bouteilles de réfrigérant produites aux États-Unis et en Europe avec un filetage 1/2, ce qui en fait un outil polyvalent et pratique pour les besoins de réfrigérant de votre véhicule.

👍👍👍 Maximisez les performances, rechargez facilement le réfrigérant de votre véhicule

😀 😃 😄Vous voulez une vie meilleure ? Voici les avantages dont vous avez absolument besoin :

1. Restez au frais et en contrôle grâce à notre tuyau de charge de réfrigérant R134A doté d’une jauge intégrée pour une surveillance facile – plus de devinettes, juste des performances puissantes.

2. Dites adieu aux tuyaux fragiles – notre tuyau de charge de réfrigérant R134A est conçu pour durer avec une construction solide et une endurance maximale, fournissant des résultats fiables à chaque fois.



3. Préparez-vous à faciliter l’entretien du véhicule avec notre tuyau de charge de réfrigérant R134A, conçu pour une utilisation facile et pratique et adapté aux bouteilles de réfrigérant produites aux États-Unis et en Europe.

Spécification :
Type : tuyau de chargement de réfrigérant de voiture
Matériau : Métal et plastique
Sujet : 1/2
Diamètre intérieur du fil : 1,14 cm/0,45 pouce
Diamètre intérieur du filetage côté bas : 1,3 cm/0,51 pouce
Pression du tuyau : 600-3000PSI
Manomètre : 100PSI
Diamètre de la jauge : 5,1 cm / 2″
Taille de l’article : environ 50,5 cm / 19,8 ”(L)
Poids net : 179 g / 6,3 oz

Forfait :
1 * tuyau de chargement de réfrigérant de voiture
T-304 Stainless Steel
Bolt On Installation
All Welded Construction
Made In USA
Classic BORLA Sound

Rate this product


8 reviews for BORLA 140039 Cat-Back Perf. Exhaust Sys. for ’97-’04 Chevrolet Corvette (C5) & Z06 (C5) V8 T-304 Stainless Steel S-Type Classic Dual Center Rear Exit Dual 4.25″x3.5″ Oval Polished T-304 Tips Each Side – For Sale – Price

  1. Michael A. Bower Jr

    Amazing sound that’s not obnoxious & no drone
    All I can say is WOW. This really woke up my 01 C5 from the stock exhaust. I combined this with the borla x-pipe and man does this make the car sound so good. Well worth the price. Had a shop install everything since I don’t have the tools to do it myself. I debated going with the dual tips vs the quad, but I didn’t want to ruin the look too much so I pulled the trigger on these instead and don’t regret it one bit. Gets nice and loud when getting on it and has some slight but quiet rumble on idle or cruising at highway speeds, so the best of both worlds!

  2. Kirby

    easy install and great sound
    This system was very easy to install and was exactly the sound I was looking for. I have the base model 2000 C5 with stock manifolds and H-pipe, this system compliments this setup with nothing else needed. I only have quick jacks (great product also for Vettes) so I couldn’t get the car high enough to get the stock mufflers off without cutting the over the axle pipes. The new Borla system went on and went together with no issues at all. Just pay attention to a few steps that are not listed in the instructions. Very simple and easy to do if you pay attention. VERY SATISFIED with this system and both the look and the sound!

  3. Tim Moultrie

    They look great.
    Fairly easy to install once the vehicle is off the ground. They are louder than OEM but they don’t really have the sound I was looking for. I wanted more of a deep and distinctive sound rather than a bunched together noise. Of course I am a little older. I put them on my 2004 Corvette with the 350 engine. I liked the sound I got out of my 66 Chev Impala SS with the 327 and glass packs. So there you go.

  4. c5

    American made
    Borla is An American made product. I have had negative experiences with offshore products and will only use made in USA on my c5 corvette. Borla is top quality. They sound great with no annoying droning at cruise speeds.

  5. Charles Merritt

    Good stuff
    It’s a Borla, which means it is not cheap. Is a good price here. Installing is a PITA, you’re gonna need to get the backside of the car WAY up. It’s not that the Borla is that bad, getting the old one out without cutting it is a real treat. I HIGHLY suggest having a shop do it unless you have a lift. The sound is beautiful, Vette sounds like it should now.

  6. Carin Timmins

    Awesome product, easy install. It requires a lift.
    Install required the car to be on a lift, I could not manipulate the stock Z06 exhaust out on the jack. It required nearly 3 feet of clearance to angle the exhaust straight down to get the flange side out from above the axle. Install was easy on the lift. Took some tweaking to get the tips all symmetric. SOUND is mellow. Nice low roar. I was expecting much more aggressive, louder sound based off Borla, aggressive sound meter. No drone and not annoying at all. This is how the car should have sounded from Chevrolet.

  7. Amazon Customer

    It has a mild sound.
    Perfect fit.

  8. J.K. 2

    UNIT WAS AS ADVERTISED,GREAT!
    INSTALLED ON MY 2001 C5 CORVETTE, SOUNDS GREAT, NOT TOO LOUD BUT SOUNDS GREAT
    WHEN YOU REV-IT-UP! NO DRONE ON HWY CRUISING, WOULD DEFINITELY RECOMMEND.
    THANK YOU BORLA.

Add a review

BORLA 140039 Cat-Back Perf. Exhaust Sys. for ’97-’04 Chevrolet Corvette (C5) & Z06 (C5) V8 T-304 Stainless Steel S-Type Classic Dual Center Rear Exit Dual 4.25″x3.5″ Oval Polished T-304 Tips Each Side – For Sale – Price
Original price was: $1,316.99.Current price is: $1,192.15.