GIGABYTE GeForce RTX 4060 OC Low Profile 8G Graphics Card, 3X WINDFORCE Fans, 8GB 128-bit GDDR6, GV-N4060OC-8GL Video Card – For Sale – Price

10 reviews for GIGABYTE GeForce RTX 4060 OC Low Profile 8G Graphics Card, 3X WINDFORCE Fans, 8GB 128-bit GDDR6, GV-N4060OC-8GL Video Card – For Sale – Price

1. 

   Amazonicuys Addictus – 19 February 2025

   The very best you can get in a low-profile video card as of 2024
   There’s not much to say about the nVidia 4060 GPU chipset that’s unique to this card; anything you see about the 4060’s performance and compatibility applies here. Standard nVidia drivers, standard very-mildly-overclocked clock-rate, all that. It’s a very good card for anything short of high-framerate 4k gaming, just like any 4060. What this card is all about is the low-profile form factor.
   This is a very compact video card. It fits into any low-profile (or, for that matter, standard) case that has video card slots in the back. As it has both a low-profile and a standard backplate, it can be used in a regular tower case perfectly well. Hang on to whichever backplate you don’t use, as someday you might want to move it to a new system. It’s fine in either, and as there isn’t really a price premium for this form factor (at least when I bought it), it’s a no-brainer.
   Specifics:
   * The fans are fairly quiet, though not 100% silent when gaming. They won’t be a distraction for people wanting to use it in an HTPC (home theater PC).
   * Cooling is fine as long as the rest of your case has decent ventilation. The fans are up to the job. I wouldn’t overclock it though, as there isn’t a lot of excess cooling capacity. When you overclock, you generate more heat and need more cooling to keep things stable. If you want to do big overclocking, get a standard card in a standard case. For factory speeds, the fans are all you need.
   * Physical build quality seems good. Everything lines up the way it should, nothing’s wobbly or loose.
   * Note that aftermarket cooling devices like water cooling blocks likely will not fit, as this card uses its own cooling mounting locations. But then, who does that in a low-profile case? That’s why you’re here, for the form-factor, right?
   * The card length is quite short, only about 7″/18cm or so. If your motherboard fits, so will this card. Just keep in mind it consumes 2 slots in width.
   * Keep in mind that you WILL need to connect a 6-pin PCI-E power cable to the card for it to function. Older low-profile cards often could get enough power from just the PCI-E slot, but that’s capped at 75 watts, and this card will pull more than that under load. Keep this in mind when you select a power supply for an HTCP build using this card.
   What it comes down to is this: if you’re doing a low-profile build for HTPC or gaming use, this is by far your best GPU option as of 2024.

2. 

   JustAGuy – 19 February 2025

   The best low profile card
   I bought this with casual, living room 4k 60fps gaming in mind. Or put another way, a console without the limitations of a console. I’m limited by my Denon receiver currently to HDMI 2.0, hence the 60fps at 4k. It does that well when paired with a an i5-12600. Cyberpunk 2077 settings mostly maxed out, raytracing off, and DLSS set to performance. It doesn’t get louder than the case fans do. I have it in a Silverstone ML04 which blends in with my other home theater gear and fits nicely in my cabinet.
   I’ll be excited to see what else can be done in a similar sized format down the road. I hope Intel and AMD are watching. We spent too long with the GTX1650 as the best consumer low-profile GPU, this is a breath of fresh air.
   This does require 8 pin power so be prepared for that – commonly low profile GPUs have been limited to 75W of PCI slot power in the past. I’m glad they did this though, as a slot-powered 4050 (or whatever they may have called it) may well have been cheaper, but it wouldn’t be enough for 4k 60fps. That would probably be a 1080 only card.
   The cooler design is seemingly pretty decent. No extruded aluminum here, it looks like the usual heat-pipe-and-fin-stack combo you see in higher performance applications.
   I am suspect of the longevity of the fans if run 24/7. There is no zero fan mode on this card, which is odd because I bet the cooler is good enough to pull it off. Seems like something that should be added with a firmware update.
   Overall I recommend this card for your low profile GPU needs.

3. 

   Astor03 – 19 February 2025

   Most powerful low-profile card available and peforms quite well.
   At the time of this review, this little 4060 is the most powerful low-profile GPU available on the market. I replaced an RTX A2000 in one of my servers with this GPU and couldn’t be happier.
   The sample I got benchmarks within ~4% of a full sized 4060, and temps didn’t break 81C under sustained testing. If I had to knock it for anything, the fans are a bit loud and whiny at full load, but I think that’s a small price to pay for a low profile card this powerful.
   The build quality is also quite good, and everything feels premium on the card itself. The bracket is easy to replace, and the horizontal power connector allows the card to fit in very tight cases.

4. 

   The_Top – 19 February 2025

   The best alternative to the RTXA2000
   This card is a beast for the size! I needed a card that was low profile, and decently fast. This card answered (for the most part)
   I was trying to keep total wattage as low as possible since I was utilizing a PICO 300W unit. The RTX 4000 SFF Ada was my first card in mind, followed by the RTX A2000 Ada (since both run off of 75W PCIe power). However, that was quickly shattered upon trying to find availability for the two cards (let alone the price gouging). So.. then I stumbled upon this gem. As it is as fast / faster than the professional cards, it needed an external 8Pin to power the card and for me wasn’t exactly ideal; for most this isnt a deal breaker; I made it work.
   And honestly, it has been a great card since in this build. Temps are cool, performance is great, and size is super compact. This paired great with the 7945HX!

5. 

   Jonathan Crabtree – 19 February 2025

   Amazing card
   Used this card in a tiny 5 liter case. No issues. Runs fast.. not to hot. Very quiet.

6. 

   Sean MacKenzie – 19 February 2025

   Fantastic little unit for that SFF case but make sure you have power figured out.

7. 

   Victor O. – 19 February 2025

   Para equipos slim que requieren de una tarjeta de bajo perfil esta es la mejor opción al momento, asegurate de tener una fuente de poder con conector de 8-pines para gpu.

8. 

   Duderino – 19 February 2025

   Ich kaufte die Low-Profile Karte im Dez. 2023 um eine Geforce 1060 in einem Midi-Wohnzimmer PC zu ersetzen.
   Für die Größe, Stromverbrauch und Preis bin von der Leistung sehr positiv überrascht. Ich habe an einem anderen PC noch eine Geforce 4070 im Einsatz und der Unterschied fällt deutlich geringer aus als gedacht.
   Von Hogwards Legacy bis Cyberpunk ist alles butterweich spielbar. Klare Empfehlung für Geräte mit wenig Platz!

9. 

   Amazon Customer – 19 February 2025

   As of now its the best low profile GPU available, the “4060” is generally not viewed well but in this form factor it makes more sense, its quiet, even in my very poorly ventilated chassis it stays cool enough.
   This card does require an 8 Pin PCIe power plug and the card draws 115w max, so you may need an adapter if your PSU hasn’t got one if you plan to install this in an OEM type machine.

10. 

    Jeric – 19 February 2025

    I love how it fits into the case perfectly, I’m upgrading an old Mini tower Dell copying the video on YouTube “We Built A Small Form Factor Sleeper Gaming PC That Crushes 1440P!” By ETAPrime and it works !!
    The card looks well built and the thermal pads and passed seemed well applied when peeking through the gap in-between the heat sink and card. So overall I’m happy with the design and size as it actually fits my constraints perfectly.